1" / 3" Tablets

An economical chlorine product:

• 3" tablets last longer — it's a larger puck which means less frequent application
• Has built-in protection against sun destruction of the chlorine residual
• Provides continuous killing of bacteria
• Has no gummy binders and won't cloud water
• Can be used in skimmers, automatic feeders and some floaters for constant chlorination

Directions For Use:
  Backwash the filter system following manufacturer's directions.  Adjust pH levels to between 7.2-7.6.  Add stabilizer to establish a minimum stabilizer level of 30-40 ppm to reduce the degradative effects of sunlight upon the chlorine residual.  Superchlorinate the pool so that a chlorine residual of between 1-3 ppm is obtained.

When Used In Automatic Chlorinators and Floaters:
  This product can be used in feeding mechanisms such as automatic chlorinators and floaters as a maintenance treatment.  Fill unit with this product and adjust the feeding mechanism to assure a constant treatment level of 1-3 ppm available chlorine in the pool water.  Normally 1-2 ounces of this product per 10,000 gallons will be needed daily.  Use a test kit or test strips to monitor chlorine levels and adjust the chlorine feed mechanism as needed.  Check and refill chlorinator as needed.  Do not let this product come in direct contact with vinyl liners or other bleachable surfaces as damage may occur.

When Used In Skimmers:
  This product may be used in plastic skimmers only if skimmer and the piping between skimmer and pump are plastic.  Do not add other chemicals through the skimmer when using this product in skimmer as an explosion or fire may result.  Do not turn pump off for more than 8 hours in vinyl pools when pucks are in skimmer.  Initially add one of this product per 10,000 gallons of water.  Add additional product as determined by a test kit or test strips to maintain chlorine residual of 1-3 ppm.

1" Tablets

3" Tablets

Click on any image to enlarge