This product is formulated to complement swimming pool water being treated with the BioGuard SoftSwim System.  It is effective against the growth of algae.  The wetting agent in this product allows it to penetrate small crevices where algae is likely to form.  This product is efficient and non-staining when used as directed.  This product will not evaporate and its algae fighting abilities actually increase as pool water temperature increases.  The residual effectiveness of this product tends to stabilize the total chemical treatment system.  This product may foam and therefore should not be used for spa treatment or in pools with attached spas or jetted returns.

• Contains a patented algae preventative that is perfect with SoftSwim.
• Highly effective algicide works hard to prevent the growth of algae.
• Regular use allows the other SoftSwim products to function more efficiently.
• Becomes more active when temperatures rise and the sun won't evaporate it.

Frequency: Every two weeks

Directions For Use:
  Ensure all pool equipment is working properly.  Backwash the filter system following manufacturer's directions.  Adjust pH to between 7.2-7.6.  Check for metals and if present add a stain and scale inhibitor to prevent staining of pool surface due to metals.  When using other products as outlined in directions for this product, always follow directions on those products.

For An Initial Application or When Pool Water Is Changed:
  Pour 32 fluid ounces (4 ppm) directly into the pool per 25,000 gallons of water.

For Routine Maintenance:
  For weekly application intervals, use 1 fluid ounce per 5,000 of water (.5 ppm).

  For two week application intervals, use 2 fluid ounces per 5,000 gallons of water (1 ppm) every other week.

  Following heavy rain showers, add an additional 1 fluid ounce per 5,000 gallons.

1 Quart

Click to enlarge