A pH neutral powder that lowers Chlorine/Bromine. Leaves no residual or cloudiness. Dissolves instantly and is completely soluble.

Directions For Use:
  Allow at least 8-12 hours for superchlorination treatment to oxidize wastes and chloramines from the pool water.  Add ChemOut to lower free chlorine reading to the required 3.0 ppm level before swimming.  Before adding any product to the pool, measure the free chlorine in the water.  This must be done to determine the correct dosage of ChemOut.

  To measure the free chlorine in water, test using either a test kit or test strips.  First, test the superchlorinated pool as you would normally.  If the available or free chlorine reading is above the highest level shown on the test's color comparator or to get a more definitive result at high chlorine levels, it may be necessary to dilute the sample.  To dilute the water sample, using a measuring cup, add 1 cup of pool water to 1 cup of tap water.  Gently stir the diluted water and the test the diluted water using either the water test kit or test strips.  When you have determined the free chlorine level of the diluted sample, multiply this level by 2.  You now have the free chlorine level of the pool.

  To calculate the ppm available chlorine that must be removed from the pool, subtract 3 ppm from the free chlorine level of the pool.  The resulting number is the amount of free chlorine you must remove before it is safe to swim.  The chart below may be used to calculate the required dose using the measuring cup supplied with this product.  Add this product directly to the pool scattering around the edge of the pool.  Keep the pump on and water circulating.  DO NOT add treatment through the skimmer.

AMOUNT OF CHEMOUT USED TO NEUTRALIZE
PPM CHLORINE SHOWN

Use cup* provided with this product only.

*Cup is 2 ounces fluid measuring cup
Use 1/2 dosage for reducing bromine residual

2 lbs.

Click to enlarge